Integrated Systems

50MHz dipoles set for Radar Systems Zond Aero LF GPR. Set includes: 2x 50Mhz dipole (1.5m long) for Zond Aero LF 1x Plastic rod 3x Clamp type 1 (b...

New and improved antenna holders to exclude any possibility that Zond Aero LF GPR will be detached in-flight during any maneuver, even with the lon...

Universal mountings for payloads on ropes/cables: echo sounders, water samplers, etc. Also compatible with some types of LIDAR payloads.  

Mountings to fix the Laser Falcon methane detector on the leg of the DJI drone.

Cable to connect SkyHub 3rd generation to Inspired Flight IF1200A drone.The cable has 2 connectors for the SkyHub:- XT30 socket connector (power)- ...

Smart cable assembly to connect SkyHub 3rd generation to DJI M300/M350 RTK drone.The cable assembly has 2 connectors for the SkyHub:- XT30 socket c...

Compatible with DJI M300/M350 RTK. MagDrone R3 mount consists of two interlocked parts – straight and angled. The straight part is meant for the le...

Cable to feed Geonics EM61Lite from the payload power connector of SkyHub 3rd generation. Connectors: - XT30 for the SkyHub - MS3112E8-3P for EM61L...

Cable to provide power from SkyHub to Radarteam Cobra Plug-In GPR system eliminating the need to use of internal battery of GPR.The cable has an XT...

Data cable to connect SkyHub 3rd generation to LightWare SF30/D rangefinder (altimeter). Connectors: - Switchcraft W16982-7SG-P-518 for SkyHub side...

Cable to connect SkyHub 3rd generation to Telem port of Pixhawk autopilot. Connectors: - Switchcraft W16982-7SG-P-518 for SkyHub side - JST 6-pin r...

Cable to connect SkyHub 3rd generation to DJI M600Pro drone. Also suitable for custom drones with DJI A3 autopilots. Connectors: - Switchcraft W169...

Cable to connect SkyHub 3rd generation to DJI M210/M210 V2/M210 V2 RTK drone.Connectors: - Molex 90123-01304 3-pin receptacle for the drone- Switch...

Cable to connect devices (like Geonics EM61Lite) with an RS232 interface to SkyHub 3rd generation. Connectors: - D-SUB male 9-pin connector for the...

Cable to connect SkyHub to the power output connector of the drone to consume electricity from the drone's main battery.Compatible with SkyHub of 2...

Cable to provide power from SkyHub to SENSYS MagDrone R3 magnetometer eliminating the need for an additional battery.Especially convenient when use...

Plastic 3D printed mountings to fix Nanoradar NRA24 radar altimeter on DJI M300 RTK drone.

Plastic 3D printed mountings to attach LightWare SF30/D laser altimeter to DJI M300/M350 RTK drone.

This clip is used with most of the mountings.

Protective/storage/transportation box for SkyHub, altimeter and cables. Size and weight: 33 x 29 x 16 cm, 1.8kg (empty weight).